Home Digital Store New Build Housing Associations Hotels Managing Agents Residential Buddy Scheme
DAS TV - Digital TV Made Simple
""
Home/Digital Store/Amps, TV Link - Remote/TV Links/Global TV Link Pro Black

 
Global TV Link Pro Black


Click for Enlarged View

Qty :


 
description
price

  • Compatible with Sky, Sky+ and SkyHD

  • Allows control of your digibox from another, already cabled, room

  • Allows you to place the Sky box out of sight (in a cupboard, etc) and still control it

  • Plug and play, installs in seconds



    The Global "TV Link" system is the easy way to control the Sky digital satellite receiver (Digi-box) from the bedroom or any other room that is already cabled.



    TV Link uses the extended remote control feature within the digital receiver to control the digital receiver from a different room. The digital receiver is normally located in the lounge, but with the system, the picture may be viewed and controlled in another room.



    Remote Eye



    This is the heart of the system and it sits on top of the TV in your bedroom or other remote viewing point. It sends the remote control signals from the bedroom to the digital receiver in the living room, along the same cable used by the TV pictures.



    Another use for the TVLink is when you wish to hide the Sky box in a cupboard or another room, out of sight. Generally you will be viewing the Sky picture using RGB quality (or in the case of SkyHD with Component or HDMI). You merely need to run a small length of coax (for a short length, you may use P/N 11544 from here) from the Male RF2 Output on the Sky box, and attach the cable to the Female input of the TVLink, and then strategally site the Remote Eye in the viewing room (the Male side of the TVLink is not used for anything)



    Important note. The TV Link is only for use with Sky Digital. It Will NOT work with cable boxes.



    Setting Up Your Sky Box For Use With The TV Link



    To set the TV Link up, it should be installed in the RF2 Out socket of your Digibox. You then need to tell the Digibox to output power to the TV Link. To do this, do, Services, 4, 0, 1, Select, 4 (Look at the remote when you do this. Not the screen). Then move down to where it says RF Power, and press the Right Arrow, so that it changes to "On". Then move down to "Save Settings" and press Select. You must then turn the digi-box off at the mains and then on again. Note that we have never had a faulty TV Link. If you find the light on the TVLink is not on, then possibly you have an incompatible TV distribution amplifier in your loft or bad cabling somewhere inbetween. To check this, try plugging the TVLink directly into the RF2 output of the Sky box. If it then works, then you know that the problem lays with either your cabling or an amplifier (We sell compatible amplifiers ). If you are still having trouble then please ensure you have followed the instructions above, and then please e-mail us.

 £ 5.95
(Ex. VAT)
 

Questions about: Global TV Link Pro Black 
Question:
I have purchased your tv link and i am having problems getting it to work. The red led light comes on when plugged directly into the sky box but when attached onto coax (RG6) is doesn't light up. I have tested the cable and it puts out enough volts but it seems the volts stop the moment the cable is attached to the adaptor. Can you help please many thanks chris  
Response

It sounds like the cable is shorting out the voltage. I would recommend re-making the connections at either end.
Hope this helps
Question:
hi just got your tv link when i go to systems 4 0 1 4 cant find rf power what am i missing thanks alex  
Response

See our guide to TV Links

http://dastv.co.uk/docs/Using_TV_Link.pdf

 
Ask a Question about: Global TV Link Pro Black
Name:
Phone::

Email::

Title::


Question::

 
Registered in England 5221287  |  VAT Registered Number GB 847 5861 80